Ligno VersaTec

The Ligno VersaTec Moisture Meter is the one meter for all your moisture meter needs…!

Fast scanning of wood and all flat surfaces of non-wood materials. Detection of different moisture levels in wood, drywall, concrete, etc. Detailed depth measurements up to 7″ deep, where ever the probe can reach. Works in wood for core readings. Works in all non-wood materials to indicate where excess moisture is hiding.

RH BluePeg can be used as a measuring device for ambient relative humidity and temperature or placed in a measuring sleeve, which can be inserted into a pre-drilled hole in the testing area.

The Ligno VersaTec incorporates the most advanced microprocessor technology from Lignomat. To inspect, detect, measure, evaluate and monitor moisture in wood, concrete, sheetrock and other building materials.

The Ligno VersaTec is loaded with features to make your job easier: pin mode, scan mode with selectable measuring depths, special calibrations for concrete and sheetrock plus RH mode.

For other building materials a reference scale for pin and pinless mode is provided.

The Package V-2M consists of the Ligno-VersaTec, Electrode E12, BNC Cable and the Case M.


  • Easy operation.
  • Depress SET Button to check settings.
  • Timed On/Off Switch.
  • Reading Hold facility.
  • Use up or down buttons to correct settings.
  • Pocket-sized, easy-to-use.
  • Heavy-duty yet light-weight construction.
  • Battery powered
  • 2 Year warranty

For Platinum Prices Login

Additional Information


Measuring Range 5-99% dependent upon species setting* 5-60% dependent upon species setting*
Resolution 0.1% for entire measuring range 0.1% for entire measuring range
Measuring Depth Up to 2″ with E12. Up to 7″ with E16. 7mm and 20 mm
Wood Species Corrections Over 125 individualised settings Over 125 individualised settings
Wood Temp. Corrections 00F to 2100F -150C to 950C Not Necessary
Reference Scale 0-99 for non-wood building materials 0-99 for non-wood building materials
Battery One 9V battery
Size 60 x 120 x 25mm
Weight 200g
Electrodes Electrode or PK Probe required No attachments available
Calibration Check The calibration is internally checked before each reading for pin and pinless mode, and automatically adjusted if necessary.
PROPERTIES: RH Mode Using RH probes in concrete is the ASTM approved method to test concrete before installing any type of floorcovering. The RH Blue Peg is totally inside the sleeve, and therefore can be left until the test is finished, removed and reused. RH Range: 0-99%, Temp: -15 to 95 degrees C.