Ligno VersaTec Kit
The Ligno VersaTec is the one meter for all your moisture meter needs…!
Fast scanning of wood and all flat surfaces of non-wood materials. Detection of different moisture levels in wood, drywall, concrete, etc. Detailed depth measurements up to 7″ deep, where ever the probe can reach. Works in wood for core readings. Works in all non-wood materials to indicate where excess moisture is hiding.
RH BluePeg can be used as a measuring device for ambient relative humidity and temperature or placed in a measuring sleeve, which can be inserted into a predrilled hole in the testing area.
The Ligno VersaTec incorporates the most advanced microprocessor technology from Lignomat. To inspect, detect, measure, evaluate and monitor moisture in wood, concrete, sheet rock and other building materials.
The Ligno VersaTec is loaded with features to make your job easier: pin mode, scan mode with selectable measuring depths, special calibrations for concrete and sheet rock plus RH mode.
For other building materials a reference scale for pin and pinless mode is provided
|PROPERTIES||PIN METERS||PINLESS METERS|
|Measuring Range||5-99% dependent upon species setting*||5-60% dependent upon species setting*|
|Resolution||0.1% for entire measuring range||0.1% for entire measuring range|
|Measuring Depth||Up to 2″ with E12. Up to 7″ with E16.||7mm and 20 mm|
|Wood Species Corrections||Over 125 individualised settings||Over 125 individualised settings|
|Wood Temp. Corrections||00F to 2100F -150C to 950C||Not Necessary|
|Reference Scale||0-99 for non-wood building materials||0-99 for non-wood building materials|
|Battery||One 9V battery|
|Size||60 x 120 x 25mm|
|Electrodes||Electrode or PK Probe required||No attachments available|
|Calibration Check||The calibration is internally checked before each reading for pin and pinless mode, and automatically adjusted if necessary.|
|PROPERTIES: RH Mode||Using RH probes in concrete is the ASTM approved method to test concrete before installing any type of floorcovering. The RH Blue Peg is totally inside the sleeve, and therefore can be left until the test is finished, removed and reused. RH Range: 0-99%, Temp: -15 to 95 degrees C.|
The Package V-2M consists of the Ligno-VersaTec, Electrode E12, BNC Cable and the Case M.
- Easy operation.
- Depress SET Button to check settings.
- Timed On/Off Switch.
- Reading Hold facility.
- Use up or down buttons to correct settings.
- Pocket-sized, easy-to-use.
- Heavy-duty yet light-weight construction.
- Battery powered
- 2 Year warranty