Instant Floor Polyaspartic
Instant Floor is a 100% solids, two component, rapid curing, polyaspartic floor coating system. A UV stable coating that is durable and decorative for all residential, commercial and industrial flooring. It is the ultimate protection for garages, decks, walkways, commercial kitchens and more. An aliphatic polyaspartic that is colour stable, allowing it to take UV exposure without the colour shift seen with other coating systems such as epoxy. Polyaspartic is a 1:1 mix ratio system that allows sufficient pot life to be rolled, brushed or sprayed with Con-Treats application equipment. It can be used in conjunction with either micro paint chips, quartz granules or on it’s own in a variety of colours with any desired slip resistance. Con-Treat’s Instant Floor creates a durable, seamless floor coating which conforms to any shape and size.
- Available in = 8ltr & 20ltr kits
- VOC = Extremely low <1%
- Install Time = One day
- Return to service = Next day
- High build thickness in 1 application = Yes
- Odour = Extremely low
- 100% solid content = Yes
- Application temperature = As low as 0C
- Elongation, expands with surface / joint = Yes
- Colour stability = UV stable
- Gloss retention = Very good
- Chemical resistance = Excellent
Features & Benefits
- 100% Solids, <1% VOC
- Extremely Fast Cure
- Light foot traffic within 2-4 hours, return to service within 24 hours.
- Able to apply at low temperatures and high humidity.
- Excellent abrasion and impact resistance.
- Excellent chemical resistance.
- Excellent UV resistance and high gloss characteristics.
- Bonds to virtually all substrates, inc; metals, wood, concrete & fibreglass.
- Ability to achieve high film builds
- Aircraft Hangers
- Decking & Patios
- Garage Floors
- Factory Floors
- Commercial Kitchens & Bars
- Entrance / Lobby / Show Rooms
- Fast Food Shops
- Hospital & Health Facilities
- Never mix more than 6ltrs at a time (3ltr A & 3ltr B).
- Always mix each batch in a fresh bucket.
- Mix slowly & thoroughly for 2 mins.
- Do not leave the product in the bucket when rolling, apply ribbons on the floor.
- It is very important to have adequate air flow to aid in curing.
- Always keep wet edge.
- Ideal roller is an 8mm micro-fibre.
Frequently Asked Questions
Is Instant Floor UV stable?
Yes, Instant Floor is a true aliphatic that will not yellow.
Does Instant Floor contain UV blockers?
No, however it will double the time it takes for a coating underneath to yellow. An additive is available on request.
Can Instant Floor be thinned?
Yes, Xylene can be added at 5%-10%, however it will decrease the working time slightly..
Can more than one coat be applied in a day?
Yes, Instant Floor can be re-coated within 1-12 hours.
Do you need to sand in-between coats?
If a subsequent coat is applied within 8 hours of the initial coat then no sanding is required.
If I miss the maximum 8 hour re-coat window, what is the process for re-coating?
Allow to dry for 12-18 hours, sand using a 180 grit sand paper, clean and re-coat. Re-coating of polyaspartic is not advisable after 7-10 days (full cure) of the initial installation, however If you must re-coat after 7 days, sand with 80 grit sand paper and wipe the floor with acetone prior to re-coating.