Aqua Seal

Aqua Seal offers the latest technology in Water Based Sealers, it has been designed for use on concrete & stone. Aqua Seal is different from any other sealer as it has been formulated to be applied to a wet surface! No more days wasted due to poor weather conditions or surfaces being too hot to spray. It is a cross linking, 100% water based acrylic sealer that penetrates into the matrix of the concrete while still maintaining a thin topical seal for the ultimate in concrete staining protection.

Aqua Seal is ideally suited for large commercial car parks, factories, large warehouse floors and general purpose concrete and stone sealing. It has been designed to perform to a 25 year standard as a matrix sealer and 3-5 years as a surface protective coating with minimal affordable maintenance for the customer while being more cost effective and better performing for the contractor. Designed for new, existing  or exposed aggregate concrete and can be applied at time of concrete pour as a “same day” cure & seal.

Advantages

  • Exceptional oil resistance
  • Breathable sealer
  • Extremely easy to apply
  • Applied to a wet substrate
  • Reductions of mildew and moss growth.
  • Natural look finish, very low sheen
  • Environmentally friendly
  • Australian made

For Platinum Prices Login

Additional Information

Aqua Seal is highly concentrated and requires dilution with water prior to application. Completely saturate the substrate with clean water prior to application to ensure the best possible penetration and performance.

 

Suggested dilution rates are:
• Plain Concrete: 1:4 (1 part product 4 parts water)
• New Exposed Aggregate: 1:3 (1 part product 3 parts water)

 

Diluted product should be applied at a rate of 3 – 5 m2 per litre depending on surface porosity.

 

Use a soft bristle broom to sweep out any pools that develop. Aqua Seal can be walked over during the curing process, however do not then walk over other substrates with product on your feet. Generally, a single flood coat is all that is required, however a second mist coat can be applied as soon as the first coat is touch dry if required.

 

It is recommended to re-seal Aqua Seal every 3 years, especially in high traffic areas. All that is required is a high pressure clean and an application as above to re-seal.

Technical Data