Australia Wide Delivery

Phone Number1300 044 625

Epoxy Vapour Barrier

Epecrete is a multipurpose, water based, three-part epoxy moisture barrier. Epecrete has excellent adhesion to most correctly prepared building surfaces such as brick, block, concrete and masonry. It is ideal used as a dampproofing membrane on concrete floors prior to floor coverings being installed where moisture exceeds the Autralian Standards. It will also stop dampness in cellars, basements etc.

Epecrete has a water vapour transmission (WVT) rate of 14g/m2 @ 24 hours when properly applied and cured. All subsequent floor coverings or paint must have a higher WVT than Epecrete to ensure no vapour condensation build up. Australia Made


Frequently Asked Questions:

  • Question - What is the coverage rate of Epecrete?
  • Answer - Epecrete is applied in 2 coats at approximately 9m2 per ltr.
  • Question - What size kits does Epecrete come in?
  • Answer - Epecrete is available in 12ltr kits.


* The above information is to be used as a guide only and Con-Treat accepts no responsibility for any consequence resulting from the advice contained herein or verbally.


copy scape