Australia Wide Delivery

Phone Number1300 044 625


Designed specifically to cure & seal car parks ...

Cure & Seal has been specifically designed for the curing and sealing of concrete carparks walkways, podiums etc. It is a proprietary water based, colloidal silica formulation applied to new concrete for an excellent cure regime, dust proofer, surface hardener and stain resistance from oils. Can be applied to concrete of any age for surface hardening, dust proofing and sealing. Cure & Seal is compatible with line marking.

Concrete curing the right way

  • Resists oil staining
  • Reduced tyre squeal
  • Industries best cure & seal for newly placed concrete
  • Environmentally friendly, Zero VOC
  • Reduces the potential for dusting
  • Reduces efflorescence
  • Invisible finish
  • Easy to maintain
  • Lasting stain protection
  • Easy to apply

 

Frequently Asked Questions:

  • Question - Is cure & seal compatible with line marking?
  • Answer - Yes, as long as the line marking material is a solvent based acrylic.
  • Question - If it is accidentally applied over a stain, can the stain be removed at a later date?
  • Answer - No, once the product has cured it is nearly impossible to remove unless using a concentrated acid. You may try sodium hypochlorite (Bleach) as this will penetrate and potentially lighten the stain.
  • Question - Can a sealer be applied over the Cure & Seal if need be?
  • Answer - Yes, but it must be a solvent based sealer.
  • Question - Can Cure & Seal be used on older concrete?
  • Answer - Yes, Cure & Seal is an excellent surface hardener, will stop dusting and seal concrete of any age.

 

* The above information is to be used as a guide only and Con-Treat accepts no responsibility for any consequence resulting from the advice contained herein or verbally.

 

Adobe

copy scape