Australia Wide Delivery

Phone Number1300 044 625


The 5 myths of selecting the correct diamond tooling ...

diamonds

Selecting the right diamond tooling is the most important decision when beginning a diamond grinding project.

Often people are mistaken as to what they need to consider when selecting the correct diamond tooling. The 2 main factors are if the concert is either ‘hard’ or ‘soft’, but often people think it’s to do with ...

  • Using the best or biggest machine

    It doesn’t matter what machine you use. You could have the best or biggest machine but if you use the incorrect tooling it still won’t work.
  • The diamond disc is faulty

    There’s really no such thing as a faulty diamond disc. It is always whether the disc is right for that concrete.
  • These concrete slabs should be the same

    No two slabs are the same, even on the same project, even on the same slab which can vary from one section to another even if poured on the same day ...
  • This diamond disc should work on every type of concrete floor

    There’s no diamond tool that will work on every type of concrete floor.
  • The MPa’ level will tell me how hard the concrete is

    The ‘MPa’ level of a slab may have little to do with how hard it is to grind, it’s more to do with strength ...

If you are unsure which diamond tools to use, contact Con-Treat today. We can advise you on the best option for your needs.

* The above information is to be used as a guide only and Con-Treat accepts no responsibility for any consequence resulting from the advice contained herein or verbally.

 

copy scape