1300 044 625

Satin Finish

"Wet Look" Stone & Concrete Sealer


Satin Finish is a penetrating sealer comprising of an alkali stable siloxane-resin in an acrylic resin solution which when applied at the specified rates will give a "wet look" satin finish, highlighting colours of the natural stone or ground concrete. Satin Finish finds use as a high quality alkali stable repellent suitable for use a variety of substrates and application methods, from post treatment by the home handyman to in plant fabricated mineral-based construction materials.

The proposed surface to be treated must be unsealed and of a porous nature. Listed below are some of the substrates successfully treated with Satin Finish

Satin Finish
  • Fibrous cement
  • Cement render
  • Concrete
  • Aerated concrete
  • Natural stone
  • Clay brick walls
  • Concrete block walls
  • Terracotta tiles
  • Slate


  • Reduction of water adsorption.
  • Reduction of efflorescence.
  • Reduction of lime erosion.
  • Reduction of water born dirt pick-up.
  • Reduction of chemical vapour corrosion.
  • Reduction of frost damage.
  • Reduction of mildew, moss, and lichen growth.
  • Restored thermal properties.
  • Does highlight colours in natural stone.
  • Suitable for porous natural stone and polished concrete
  • Lower slip outcome than conventional acrylic sealers

The above information is to be used as a guide only and Con-Treat accepts no responsibility for any consequence resulting from the advice contained herein or verbally.